SAF-T-EZE® Nickel Grade Anti-Seize is compounded from fine particles of nickel, aluminum and graphite in a heat resistant lubricant and performs particularly well as nickel lubricates and keeps the metallic surfaces apart even under high pressure.
It is recommended when very different metals are used together such as brass and steel or where high nickel alloy metals such as stainless steel are involved. Nickel Anti-Seize is also used where soft metals such as copper cannot be present, and it performs to 2600ºF (1425ºC).
Characteristic
Nickel Grade Anti-Seize
NSF H2 REGISTERED
BASIC COMPOSITION: NICKEL/ALUMINUM/GRAPHITE
COLOR: SILVER GRAY
TEMPERATURE: -65ºF TO 2600ºF
NLGI GRADE: 3
SPECIFIC GRAVITY: 1.33 gm/cc
WEIGHT PER GALLON: 11.09 LB
DROP POINT: 350ºF
FLASH POINT: C.O.C. >302ºF
PENETRATION: 225 ± 25
PARTICLE SIZE: 1 MIL. MAXIMUM (25)
This product is not recommended for pure oxygen systems.
Data Sheets
| Product | Part Number | Container Size | Case Qty |
|---|---|---|---|
| ST-1N | 80212 | 1 oz Tube | 25 |
| ST-4N | 80222 | 4 oz Tube | 10 |
| SBT-4N | 80227 | 4 oz Brush Top | 24 |
| SBT-8N | 80237 | 8 oz Brush Top | 12 |
| SC-1N | 80253 | 16 oz Brush Top | 12 |
| SL-16N | 80255 | 16 oz Can | 12 |
| SA-12N | 80256 | 12 oz Aerosol | 12 |
| SBT-16N | 80257 | 16 oz Brush Top | 12 |
| S-160N | 80259 | 500 g Tub | 12 |
| SL-2N | 80260 | 2 lb Tub | 6 |
| SL-1KN | 80261 | 1 kg Tub | 6 |
| SL-8N | 80265 | 8 lb Can | 4 |
| S-42N | 80278 | 42 lb Pail | --- |
| S-130N | 80289 | 130 lb Drum | --- |
| S-425N | 80299 | 425 lb Drum | --- |
General Information
SAF-T-EZE® Nickel Grade Anti-Seize is recommended where very different metals are used together such as brass and steel because Nickel is a very unreactive metal that protects and lubricates the metallic surfaces. It is also used where high Nickel alloy metals such as Stainless Steel, or where Titanium or other hard metals are involved. Nickel Anti-Seize is also used where metals such as copper cannot be present such as in caustic, ammonium or high acidity processing plants. Surface need not be cleaned before application unless grit or low quality oil/grease is present and ultimate performance is required. Use on threaded parts, bushings, gears, valve stems, chain sprockets, levers, hinges, pivots, rollers, heat exchanger or manifold bolts, or as a gasket release agent, etc.
Nickel Premium Anti-Seize
Performs to 2600ºF (1425ºC)
Characteristic
Nickel Premium Anti-Seize
BASIC COMPOSITION: NICKEL/ALUMINUM/GRAPHITE
COLOR: SILVER GRAY
TEMPERATURE: -65ºF TO 2600ºF
NLGI GRADE: 3
SPECIFIC GRAVITY: 1.28 gm/cc
WEIGHT PER GALLON: 10.68 LB
DROP POINT: 350ºF
FLASH POINT: C.O.C. >302ºF
PENETRATION: 225 ± 25
PARTICLE SIZE: 1 MIL. MAXIMUM (25)
This product is not recommended for pure oxygen systems.
Data Sheets
Nickel Premium Anti-Seize
| Product | Part Number | Container Size | Case Qty |
|---|---|---|---|
| NPT-.25 | 80612 | 0.25 oz Tube | 50 |
| NPT-4 | 80622 | 4 oz Tube | 10 |
| NPBT-4 | 80627 | 4 oz Brush Top | 12 |
| NPBT-8 | 80637 | 8 oz Brush Top | 12 |
| NPC-1 | 80653 | 16 oz Cartridge | 12 |
| NPBT-16 | 80657 | 16 oz Brush Top | 12 |
| NPSL-2 | 80660 | 2 lb Tub | 6 |
| NPSL-8 | 80665 | 8 lb Can | 4 |
| NP-42 B | 80678 | 42 lb Pail | --- |
| NP-130 B | 80689 | 130 lb Drum | --- |
| NP-425 B | 80699 | 425 lb Drum | --- |
General Information
SAF-T-EZE® Nickel Premium Anti-Seize is recommended where very different metals are used together such as brass and steel because Nickel is a very unreactive metal that protects and lubricates the metallic surfaces. It is also used where high Nickel alloy metals such as Stainless Steel, or where Titanium or other hard metals are involved. Nickel Premium Anti-Seize is also used where metals such as Copper cannot be present such as in caustic, ammonium or high acidity processing plants. Surface need not be cleaned before application unless grit or low quality oil/grease is present and ultimate performance is required. Use on threaded parts, bushings, gears, valve stems, chain sprockets, levers, hinges, pivots, rollers, heat exchanger or manifold bolts, or as a gasket release agent, etc.