Nuclear Nickel Grade Anti-Seize is formulated from the highest purity grease to minimize sulphur, halogens, mercury, etc. This product meets MIL-PRF-907E and exceeds the requirements of General Electric and Westinghouse.
Certificates of conformance is included.
Nuclear Nickel Grade Anti-Seize
Performs to 2600ºF (1425ºC)Westinhouse Matl. Spec. 53701WQ 10 CFR Ch1 Part 50, App. B
Characteristic
Nuclear Nickel Grade Anti-Seize
BASIC COMPOSITION: NICKEL/GRAPHITE
COLOR: SILVER GRAY
TEMPERATURE: -65ºF TO 2600ºF
NLGI GRADE: 3
SPECIFIC GRAVITY: 1.2 gm/cc
WEIGHT PER GALLON: 10.0 LB
DROP POINT: 500ºF
FLASH POINT: C.O.C. 440ºF
PENETRATION: 220 ± 30
PARTICLE SIZE: 1 MIL. MAXIMUM (25)
This product is not recommended for pure oxygen systems.
| Product | Part Number | Container Size | Case Qty |
|---|---|---|---|
| NGBT-4 | 80427 | 4 oz Brush Top | 12 |
| NGBT-8 | 80437 | 8 oz Brush Top | 12 |
| NGBT-16 | 80457 | 16 oz Brush Top | 12 |
| NG-8B | 80465 | 8 lb Can | 4 |
| NG-42 B | 80478 | 42 lb Pail | --- |
| NG-130 B | 80489 | 130 lb Drum | --- |
| NG-425 B | 80499 | 425 lb Drum | --- |
General Information
Nuclear Nickel Grade Anti-Seize is recommended where product purity is critical and controlled impurities must be maintained. Surfaces do not need to be cleaned before applications unless grit or low quality oil / grease is present and ultimate performance is required. Use on threaded parts, bushings, gears, valve stems, chains, sprockets, levers, hinges, pivots, rollers, heat exchanger bolts, manifold bolts, or as gasket release agent etc.