Lubricants – Cleaners – Removers
CCA-11 Contact-Clean
Data Sheets
CCA-11 Contact-Clean
Electrical Contact-Clean is a specially formulated solvent designed to remove carbon deposits, grease, oil and corrosion deposits from electrical equipment. After cleaning, check and oil parts that need lubrication. Eliminates noise caused by dust and dirt.
| Product | Part Number | Container Size | Case Qty |
|---|---|---|---|
| CCA-11 | 85556 | 11 oz Fill/16 oz Can | 12 |
GOA-14 Gasket-Off
Data Sheets
GOA-14 Gasket-Off
Gasket-Off is designed with hydrocarbon thickeners and propellants which disperse as a foamy white cream to remove baked-on gaskets, gasket cement, carbon deposits, dried oils, greases and paint from metal in 10 minutes.
| Product | Part Number | Container Size | Case Qty |
|---|---|---|---|
| GOA-14 | 85456 | 14 oz Fill/16 oz Can | 12 |
Not recommended for some plastics.
POA-12 Pen-Oil
Data Sheets
POA-12 Pen-Oil
Pen-Oil is a hydrocarbon based compound formulated with low surface tension to allow it to penetrate accumulated grease and grit deposits as well as rust and other corrosion. It displaces moisture and clings to metal providing a thin protective film against oxidation.
| Product | Part Number | Container Size | Case Qty |
|---|---|---|---|
| POA-12 | 85056 | 12 oz Fill/16 oz Can | 12 |
BDA-9 Belt-Dress
Data Sheets
BDA-9 Belt-Dress
Belt-Dress is formulated to meet industrial demand for increased operating efficiency and longer belt life. It reduces stiffness and restores flexibility to worn and checked belts.
| Product | Part Number | Container Size | Case Qty |
|---|---|---|---|
| BDA-9 | 85656 | 9 oz Fill/16 oz Can | 12 |
DMA Dry-Moly
Data Sheets
DMA Dry-Moly
Dry-Moly is an air drying lubricant that offers properties in a resin bonded system. It requires little or no surface preparation, is easy to apply, provides excellent adhesion to substrates, and dries quickly.
| Product | Part Number | Container Size | Case Qty |
|---|---|---|---|
| DMA | 85856 | 8.25 oz Fill/16 oz Can | 12 |
TGA-10 T-Gel Lube
Meets: MIL-PRF-907E
Data Sheets
TGA-10 T-Gel Lube
T-Gel Lube is a transparent, high pressure lubricant with high adhesive strength. A unique combination of natural and synthetic lubrication agents coupled with a high molecular weight polymer (PTFE) make of this product one of the best available.
| Product | Part Number | Container Size | Case Qty |
|---|---|---|---|
| TGA-10 | 85956 | 10 oz Fill/16 oz Can | 12 |
SLA-9 Silicone-Lube
Data Sheets
SLA-9 Silicone-Lube
Silicone-Lube is formulated from the highest quality silicone fluids to provide an extended range of lubrication where conventional hydrocarbons and oils vaporize. These silicone fluids penetrate the surface of plastics and rubber as well as metals to provide a non-tacky film of lubrication. Silicone-Lube exhibits the same viscosity at high and low temperatures to provide uniform lubrication from -60ºF to +500ºF. This product is colorless, odorless, tasteless and non-staining. Silicone-Lube meets the requirements of the United States Department of Agriculture for incidental food contact in plants operating under Federal Meat and Poultry Inspection Program.
| Product | Part Number | Container Size | Case Qty |
|---|---|---|---|
| SLA-9 | 85156 | 9 oz Fill/16 oz Can | 12 |