Pipe-Seal and Fine Pipe-Seal
See also: SAF-T-LOK Anaerobic Pipe Sealant
SAF-T-EZE® Pipe-Seal is compounded with PTFE to lubricate joint assembly. It is resistant to chemicals and can be used on pipes larger than 3/4″ diameter to seal kerosene, LP gas, oil, water, weak caustic acids and low pressure steam. See Fine Pipe-Seal for pipes less than 3/4″ diameter.
SAF-T-EZE® Pipe-Seal will not run, drip or separate and will withstand moderately high pressure and performs to 500ºF (260ºC). When rubber is present Fine Pipe-Seal is recommended.
Pipe-Seal
Performs to 400ºF (204ºC)
Characteristic
Pipe-Seal
BASIC COMPOSITION: PTFE
COLOR: WHITE
TEMPERATURE: -100 TO 400ºF
SPECIFIC GRAVITY: 1.31 gm/cc
MAXIMUM PRESSURE: 10,000 PSI
FLASH POINT: C.O.C. 350ºF
This product is not recommended for pure oxygen systems.
Data Sheets
| Product | Part Number | Container Size | Case Qty |
|---|---|---|---|
| PSBT-8 | 82537 | 8 oz Brush Top | 12 |
| PSBT-16 | 82557 | 16 oz Brush Top | 12 |
| PS-10 | 82565 | 10 lb Can | 4 |
General Information
Pipe-Seal with PTFE is used where resistance to chemicals is needed. It can be used on services that contain gasoline, kerosene, LP gases, oil, refrigerants / solvents, caustics, many acids, water, gas and steam. It can be used on pipes and threaded connections of all materials. Pipe-Seal is recommended for heavy duty sealing on joints larger than 3/4″ in diameter. Pipe-Seal can be applied as low as 10ºF (-12ºC).
Fine Pipe-Seal
Performs to 400ºF (204ºC)
Characteristic
Fine Pipe-Seal
BASIC COMPOSITION: PTFE
COLOR: WHITE
TEMPERATURE: -100 TO 400ºF
SPECIFIC GRAVITY: 1.08 gm/cc
MAXIMUM PRESSURE: 5,000 PSI
FLASH POINT: C.O.C. 55ºF
This product is not recommended for pure oxygen systems.
Data Sheets
Fine Pipe-Seal
| Product | Part Number | Container Size | Case Qty |
|---|---|---|---|
| FTBT-4 | 82627 | 4 oz Brush Top | 12 |
| FTT-7 | 82633 | 7 oz Tube | 4 |
| FTBT-8 | 82637 | 8 oz Brush Top | 12 |
| FTBT-16 | 82657 | 16 oz Brush Top | 12 |
General Information
Fine Pipe-Seal with PTFE is used where resistance to chemicals is needed. It can be used on services that contain gasoline, kerosene, LP gases, oil, refrigerants / solvents, caustics, many weak acids, water, gas and steam. It can be used on pipes and threaded connections of all materials: Iron, Stainless Steel, Aluminum, Brass, Plastic, etc. Fine Pipe-Seal is recommended for sealing of joints less than 3/4″ in diameter. This liquid sealant is self-lubricating in assembly. This product will not swell or attack rubber parts.